Micro-processor controlled, 10 amp continuous duty, multi-stage battery charger

The TRUECHARGE 10 is designed for batteries from 25 amp-hours to 200 amp-hours. Using alligator clip leads for battery connection, this portable charger offers quicker charging times than many 15, 20, and 30 amp rated Ferro resonant battery chargers due to multi-stage charging capability.

The TRUECHARGE 10 gives ripple-free charging performance when charging from inconsistent line voltage as typically seen from dock power or generators. Ultimately, this saves wear and tear on your batteries and greatly extends their lifetime.

TRUECHARGE 10
Safety Features:

Over-temperature shutdown

Non-sparking feature for safe battery connection

Reverse polarity and short-circuit protection

TRUECHARGE 10 Product Features:

Fully Automatic Operation:
Charger can be left permanently attached to batteries for true "connect and forget" operation

Battery Type Selector Switch:
Adjust charger output for the different charging requirements of sealed (gel) and conventional flooded (wet) batteries

Clip-on Battery Leads:
Utilize alligator clip leads for quick connection to positive and negative terminals

Battery Status LED indicators:
Display stage of charge and battery ready status

Manual Temperature Compensation:
For charge best suited to the ambient temperature conditions

Compact Size and Weight:
Designed for easy installation

TRUECHARGE 10/10i

Output Current	10 amps continuous duty
Output Voltage Charge Float	(Depending on Settings) 13.8 - 14.8 V DC 13.1 - 14.2 V DC*
Input Voltage Range	90 - 135 V AC, 48 - 62 Hz (TRUECHARGE 10) 200 - 250 V AC, 48 - 62 Hz (TRUECHARGE 10i)
Battery Connections	Alligator clip leads
Weight	3.5 lbs./ 1.6 kg.
Dimensions (LxWxH)	7.5" x 6.75" x 2.75" / 19 cm x 17 cm x 7 cm
Recommended Use	12V lead-acid batteries: 25 Ah to 200 Ah

Back to Chargers Page

To Top