SeaVac

Its time to give your old vacuum cleaner the old HEAVE HO!
Some things that work well on land just don't work as well at sea. One of those things is your old vacuum cleaner. If you're still using an upright or canister vacuum cleaner, give it the old heave ho and get a SeaVac built-in system.
Just 3 7/8" deep, SeaVac won't take up valuable storage space. And only SeaVac is built with parts designed to withstand the salt air. The powerful 11amp SeaVac motor even lets you use a turbo head with beater bar for real cleaning power. Just three wires to connect and you're done. If you can install a bilge pump, you can install a SeaVac!



 
SeaVac's unique ribbed vacuum chamber and triple filtration system maximizes airflow and creates a suction that exceeds most household vacuum cleaners. It's housing is available in stainless steel or powder coated, wires are tinned for corrosion protection and screws are stainless wherever possible. The front panel is made of hi-tech poly-carbonate. It even comes with a "full bag indicator light".

You can also order your SeaVac as a surface mount unit and it arrives with a bracket and six foot electric cord for installing in a closet or cabinet. SeaVac was created and is manufactured by boaters for boaters. Don't delay, inquire about SeaVac today.

The beautiful, timeless design works with any décor.

 
SPECIFICATIONS
  SeaVac SeaVac II
FRONT PANEL 9" wide x 16 5/8" high 9" wide x 16 5/8" high
HOUSING 7 3/4" wide x 15 3/4" high x 3 7/8" deep

Polished Stainless Steel 		7 3/4" wide x 15 3/4" high x 3 7/8" deep

Powder-Coated Steel
VACUUM MOTOR 115/60 volt, 11 amp. 115/60 volt, 11 amp.
MOTOR SEALED SUCTION 100 inches H2O 100 inches H2O
MOTOR CFM 100 cfm with 1 1/2" opening 100 cfm with 1 1/2" opening
CONTROLS ON/OFF Switch

Full-bag indicator		 ON/OFF Switch

None
WIRING Stranded, tinned wiring.
Direct hard wiring into housing
or with 6' extension cord
for surface mount unit.		 Stranded, tinned wiring.
Direct hard wiring into housing
or with 6' extension cord
for surface mount unit.
COLORS Biscuit, White Biscuit, White
INSTALLATION In-wall flush mounted
Or surface mounted		 In-wall flush mounted
Or surface mounted
SHIPPING WEIGHT 12 LBS., unit only 12 LBS., unit only
WARRANTY 2 years with normal use 2 years with normal use

SeaVac is available with multiple inlet valve options for new construction

Boat Electric Co., Inc.
2520 Westlake Ave N
Seattle, WA 98109
Phone 206-281-7570
Fax 206-281-7511

Store Hours
Monday - Friday 8:30 - 5:00
Saturday 9:00 - Noon
closed holiday weekends