This shows a comparison of voltage discharges and the length of the discharge time. The battery conditioned with Nanopulser discharges for a longer amount of time which means a larger capacity.

[40B19L] "JIS standard" battery was used.
Note: The test was done with 12V Nanopulser without auto-stop feature.


 

In order to evaluate the effect of Nanopulser on a sulfated battery, changes in specific gravity after charging and discharging were monitored for five cycles. It clearly showed a gradual improvement in specific gravity after each cycle.

*Test Protocol and Specification

•	Battery: 38B19L Shin Kobe 12V starter battery
•	Charge and discharge current and duration:
	Five hour (300 min.) of charging at 5.6A.
	Discharge at - 5.6A down to 10.5V.
•	Temperature is at 25 degree C, (+) (-) 5 degree C.
•	Humidity is at 55%, (+) (-) 10%.
•	One sulfated battery was used for the test       NanoPulser Main    -     Method of operation        -      Sulfation