Electric Heater Pik-A-Watt

Electric Heaters

Stainless Steel

For the Marine Environment

Pic-A-Watt Fan Forced Built-in Wall Heater

What is a "Pic-A-Watt"?

The exclusive Pic-A-Watt Metal sheathed Element is internally re-connectable to allow the installer
to select 6 different outputs (250-500-750-1000-1250-1500) on the 120 Volt models and
7 different outputs (500-750-1000-1250-1500-1750-2250) on the 240 Volt models.
This versatility is very important to the marine and RV buyer who is often
limited to 30 amps total shore power or less.
You can install several units in various cabins and select low wattage settings and keep a little
heat wherever it is important without overloading your shore power service.

Need to change the heat settings often?

Another option is the Dial-A-Watt Models. You can change the wattage
of the heater with a convenient "Dial" on the front of the heater.
Go to the Dial-A-Watt Page for more information.

Need to have an extremely long life for the fan motor?

We also have a Pic-A-Watt "Decade" long life Model available,
Go to the Pic-A-Watt Decade Page for more information.

Motor: Thermally protected and permanently lubricated for trouble free operation.

Fan: Tangential (Squirrel cage) blower provides whisper quiet operation 95 CFM.

Element: Exclusive Pic-A-Watt heating element allows field adjustment to select
between several wattage's, at time of installation. Metal sheathed elements are copper
brazed onto steel plate fins producing a commercial grade element with a 7 year warranty.

Over temperature Control: Bimetallic limit turns the element off when an over
temperature condition occurs. Automatically resets when the normal temperature returns.
Optional Manual Reset safety switch is available for inspected vessels.

Safety Light: Illuminates when the thermal cutout trips and turns off when the limit resets.

Wall Box: 20 gauge stainless steel. Factory installed ground wire. Optional surface mount box
is available plus a surface mount box for inspected vessels with a sloped top.

Grill: 20 gauge stainless steel cover with contemporary die formed round corners.

Options:

Thermostat - 1-Pole (no off) or 2 - Pole (with off) unit mounted thermostat 45° -80°
Surface mount wall box
Sloped top for surface mount box

Heater Selection Chart

CATALOG NO.	VOLTS	PIC-A-WATT - WATTAGE RANGE ˛	Wt.
PAW1215-SS ^1-2	120	250•500•750 1000•1250•1500	9
PAW2022-SS ^1-2-4	208	500•750•1000 1250•1500•1750•2250
PAW2020-SS ^1-2-4	208	2000•1000
PAW2422-SS ^1-2-3-4	240 ł	500•750•1000 1250•1500•1750•2250
PAW2720-SS ^1-2-4	277	1000•2000
OPTIONS
-MR	Manual Reset (Factory Installed)	Required on USCG inspected vessels	9
-ST	Slope Top Surface Can	Required when surface mounting entire heater on inspected vessels	14.5

	š - Packaged complete with interior, grill and recessed wall can.
	˛ - Factory wired for maximum wattage, field convertible to lower wattage's as listed above.
	ł - Not recommended for 208V power - Order 208 volt model.
	⁴^- Non-Stock - Factory order only.

Accessories

CATALOG NO.	DESCRIPTION	Wt.
PAWF-SS	SS Recess Can with Mounting Flange	4
PAWS-SS	SS Surface Wall Can	4
PAWG-SS	PAW Series Stainless Grill	2
PT-1-SS	1-Pole Thermostat kit (no off)	0.35
PT-2-SS	2-Pole Thermostat kit (with off)	0.35

PIC-A-WATT Dimensions

PIC-A-WATT ELEMENT
showing the non-glowing sheathed element
and electrical connections

Caution: These units are not approved for installation into spaces where the
equipment is required to be certified as USCG "Ignition Protected" such as
the engine rooms and other areas of a gasoline powered boat.

To Top of This Page

Dial A Watt

Decade - Pick A Watt

Kick Space Heaters

"Pump House" Utility Heater

Request for Information

Boat Electric
Product Directory

Send Us E-Mail

Search Our Site