Stainless Steel

Kick Space Heater.

 
Kick Space Heater Dimensions

 

Motor: Thermally protected, and permanently lubricated.

Fan: Tangential (Squirrel cage) blower provides quiet operation. 85 CFM.

Element: Dual wattage element allows for field adjustment. Made from Ni-Chrome
alloy open coil wire wrapped around a mica insulator.

Thermal Cutout: Safety limit turns off power to the element if it overheats and
automatically resets.

Safety Light: Illuminates when the thermal cutout trips and turns off when the limit resets.

Wall Box: 20 gauge Stainless Steel. Zero clearance to insulation.

Grill: 20 gauge Stainless Steel cover .

Options:1-Pole or 2-Pole unit mount thermostat 45º-80º operating range, retrofit grill,
and overlap grill.

Selection Chart

Heaters shipped complete with wall can & grill

Model
No.
UPC Vendor
#783940
Volts Wattage¹ Wt.

 

MKT1210-SS 11007 120 1000 or 500
MKT1212-SS 11013 120

1200 or 600

8
MKT1215-SS 11014 120 1500 or 750
MKT2410-SS 11001 240
208
1000 or 500
750 or 375
MKT2412-SS 11005 240
208
1200 or 600
900 or 450
MKT2415-SS 11008 240
208
1500 or 750
1125 or 562
 ¹ Factory wired for full wattage, field convertible to half watt.

Accessories

A-Alternate  B-Retrofit

Model UPC Vendor
#783940
Description Wt.
KT-1-SS 11010 Single Pole Unit Mount Thermostat Kit (no off) 1
KT-2-SS 11011 Double Pole Unit Mount Thermostat Kit (with off)
KTG-SS 12269 Wall Trim Grill - No overlap

 

                       Dimensions

             

 

Caution: These units are not approved for installation into spaces where the
equipment is required to be certified as USCG "Ignition Protected" such as
the engine rooms and other areas of a gasoline powered boat.

 

To Top of This Page

Heating Directory

Pik-A-Watt

Dial-A-Watt

Decade

Utility

 

Product Directory Send us E-Mail Search our Site