ELECTRONIC POWER PRODUCTS COMMUNICATION • NAVIGATION
 
Inverter/Chargers

A complete line of High Power DC-AC Inverters with Built-in Battery Chargers.

The circuitry of these new Inverter/Chargers incorporates a technology which is field-proven and was carefully refined for years in both harsh industrial and sensitive utility applications. Now this rugged design is offered for marine applications where reliability and performance are paramount, and low noise operation has become a critical factor in the boat owner's choice of power products. While incorporating numerous important features these inverter/chargers are engineered with a high functionality approach that installers will appreciate. All connectors and mounts are heavy duty commercial grade. Ten models are available for use with 12 or 24 volt battery systems and provide continuous rated AC power ranging from 1200 to 4800 watts at 115 VAC, 60 Hz, or 230 VAC, 50 Hz, depending on model.

 

Two series are offered:

The Guided Wave series produces a quasi-sine wave output to match the RMS value of AC utility power and enables operation of almost all appliances, such as refrigerators, microwaves, dishwashers and power tools.

The Perfect Wave series outputs pure sinusoidal AC for flawless efficient operation of all appliances, plus loads with sensitive electronics and microprocessors such as computers and medical equipment which are intolerant to any AC wave distortion.

Features

  • Rugged hostile environment-proven circuitry generates Perfect Wave or Guided Wave AC for powering any appliance, from wattage-hungry refrigeration to highly input-sensitive computers, electronic controllers/processors.
  • Built-in high output charger for rapid battery bank replenishment - 1200-1799 watt models employ adjustable two stage charger (see Specifications matrix). 1800-4800 watt models feature three stage charger with output programmable for, gel-cell, flooded lead-acid or AGM battery type and amp-hour capacity selector for proper charging in various applications.
  • Internal charger is activated by an automatic transfer relay whenever external AC power is available. Optional Battery Integrator permits charging of multiple banks
  • Designed for maximum ease of installation and operation - installer and user-friendly. Large DC input terminal blocks and front panel GFCI protected outlet receptacles. AC may also be hard-wired.
  • All important aspects of inverter and charger operation clearly displayed with front panel status indicators - optional remote panel available
  • Numerous safety and circuit protections: short circuit, overload, over-temperature, ground fault protection, output circuit breaker
  • Thermally controlled cooling fan prolongs life of components
  • Automatic low voltage shutdown circuit prevents damage to batteries due to over-discharge when using inverter function.
  • Heavy duty powder coated aluminum construction and conformal coated internal circuitry - built to last in the harsh marine environment
  • UL listed with full two year warranty

Specifications

Model
12-1200IC
12-1801F
Inverter Output:
VAC
115V, 60 Hz.
115V, 60 Hz.
115V, 60 Hz.
230V, 50 Hz.
115V, 60 Hz.
Watts (Surge)
2400
3600
4000
4000
5500
Watts (Cont.)
1200
1800
1800
1800
2500
Wave Type
QS
QS
PS
PS
QS
Inverter Input:
VDC
11-14
11-14
11-14
11-14
11-14
Max Amps
120
180
180
90
250
Charger Input:
VAC
115V, 60 Hz.
115V, 60 Hz.
115V, 60 Hz.
230V, 50 Hz.
115V, 60 Hz.
Max Amps
9
13
15
8
15
Charger Output:
Max Amps@V
50A@12V
65A@12V
85A@12V
85A@12V
100A@12V
Type
two stage
two stage
three stage
three stage
three stage
Case:
Size Reference
I-1
I-1
I-2
I-2
I-2
Weight: Lbs./Kg.
31/14
35/16
54/25
54/25
54/25
Model
12-3000IC
24-1300IC
24-4800IC
24-2201F
Inverter Output:
VAC
*115V, 60 Hz.
115V, 60 Hz.
115V, 60Hz.
*115V, 60 Hz.
230V, 50 Hz.
Watts (Surge)
6500
3000
6500
14000
6500
Watts (Cont.)
3000
1300
2200
4800
2200
Wave Type
PS
QS
PS
PS
PS
Inverter Input:
VDC
11-14
22-28
22-28
22-28
22-28
Max Amps
300
65
110
240
110
Charger Input:
VAC
115V, 60 Hz.
115V, 60 Hz.
115V, 60 Hz.
115V, 60 Hz.
230V, 50 Hz.
Max Amps
20
9
15
40
8
Charger Output:
Max Amps@V
105A@12V
30A@24V
40A@24V
115A@24V
40A@24V
Type
three stage
two stage
three stage
three stage
three stage
Case:
Size Reference
I-3
I-1
I-2
I-3
I-3
Weight: Lbs./Kg.
75/35
30/14
57/26
95/43
57/26
*115V/230V optional

Charger Characteristics:

Up to1799 Watts: Two stage, float voltage adjustable output (see VDC @ Float above)

1800 Watts and Larger: Three stage "smart charger", programmable; via selector switch for gel, flooded lead-acid or AGM battery type; temperature compensated.

Case Size References:
Inches
Centimeters
H
W
D
H
W
D
I-1
7.5
8.2
15.0
19.1
20.8
38.1
I-2
7.5
16.0
15.5
19.1
40.6
39.4
I-3
10
17
16
25.4
43.2
40.6

 

Wave Type:

PS = Pure Sine (Perfect Wave Series)

QS = Quasi Sine (Guided Wave Series)

Operating Temperature (all models): -22° C to +40° C (0° F to 104°F)

Inverter Regulation:

120 VAC RMS (110V-127V)

230 VAC RMS (220V-254V)

Protection Features (all models):

  • Automatic low battery shutdown
  • Output circuit breaker
  • Auto high temperature shutdown/recovery
  • Short circuit protection
  • Overload protection
Mechanical Features (all models):
  • Thermally controlled cooling fan
  • Dual GFCI protected duplex outlet
  • AC hard-wire (optional)
  • Powder coated aluminum case with shelf or bulkhead mounting flanges
  • Conformal coated printed circuit boards

Options/Accessories:

  • Remote control and indicator panel; provided with 25' of cable. Use model ICR-1 with I-1 case models. Use model ICR-2 with I-2 and I-3 case models.
  • Battery Integrator, Models BI-100 and BI-24-100, enables charging of multiple isolated battery banks.
  • AC and DC energy monitors.
  • Inverter info center panel blanks.
  • High current fuse assembly.