Design Your System

 

 

 

 

Designing a Frigomatic refrigeration system is easy thanks to Frigoboat’s pre-charged “Mix and Match” concept.

Just follow the 4-step process below to design the correct system for your boat.

Check out Marine Refrigeration 101 if you would like an overview of how marine refrigeration systems work before You begin.

• Step 1: Choose Your Evaporator

• Step 2: Choose Your Compressor / Condenser

• Step 3: Choose Your Thermostat

• Step 4: Choose Your Accessories

---

Guide to Choosing Evaporators & Condensing Units

• Evaporators; Vertical, Bin (B), Horizontal (H), Flat Plate (F)

• Aluminum Evaporators versus Holding Plates when used on small 12v/24v systems

• Condensing units; Air cooled (AV, AH, Capri, Paris), Water cooled (W) or Keel cooled (K)

• Consumption Guide - Identify The Capabilities You Need