HYDRONIC 16
Ideal for power boats up to 48 feet
and sail boats up to 60 feet
(for Northwest based boats -
for other areas see
the sizing guide)
Specifications
|
Heat Output |
54,630 btu's | 16 KW |
| Fuel Consumption | .48 gph | 1.8 lph |
| Electrical Draw 24 volt | 2.1 amps | |
| Electrical Draw 12 volt | 4.4 amps | |
| Pump 24 volt | 4.6 amps | 690 gph |
| Pump 12 volt | 8.5 amps | 690 gph |
| Weight | 40 lbs | 18 kg |
Boat Electric's Value Added Marine Heating Features and Benefits include:
 | All control wiring and components are mounted in a control box to aid in wiring installation. |
| All heater over current protection has been upgraded to USA standard fuses. |
| Manual over-ride for water pump operation to aid in system fill and bleeding. |
| Standard system is configured for up to 5 zone thermostats. (1 thermostat is included with basic kit.) |
| Multiple "Sub-Master" feature when system is installed with 2 or more zone thermostats. Allows the Espar heater to cycle off, to a stand-by mode, when all thermostats are off. Any thermostat that calls for heat will reactivate the heater. |
| Systems that use "Fan" type heat exchangers have the fans delayed until the water has increased in temperature enough to put out warm air. This permits the system to come up to temperature faster and eliminates the cold air from the fan heat exchangers. |
| Fault code retrieval device, with memory, is built in to the control box. |
| Quick access plug is made available for computer diagnostics. |
Store Hours
Monday - Friday 8:30 - 5:00
Saturday 9:00 - Noon
closed holiday weekends