Automatic Control Maintains Constant Protection Level - 
for vessels up to 45 feet LOA

These controlled sacrificial anode systems provide complete protection against galvanic corrosion on fiberglass and wood hulled boats.

Monitoring allows a visual indication of system performance and early warning of stray corrosion currents from electrical faults.

Caustic attack to wood at protected fittings is prevented.

Features of the system include:

• Easy to read analog panel meter display
• Rugged, accurate, stable reference electrode
• Meter reads continuously, no push to read buttons
• Momentary switch for isolated shaft and prop protection level sensing
• Easy to install

Controller - with color coded display, should be mounted in highly visible location - 6 1/4"L x 3 3/4"H x 2 3/8"D

Anode Studs - Two 3/8" x 5"L insulated brass anode mounting studs with hardware

Reference Cell - Should be installed under hull near a protected fitting - 8"L x 2 3/4"W x 1"D (outside hull) - two mounting studs

Sense Brushes - 3/4"W x 13 5/8"L shaft wiper assembly (s) - for sensing shaft and prop protection level

Automatic Control Maintains Constant Protection Level - 
for vessels 45 feet to 65 feet LOA

These controlled sacrificial anode systems provide complete protection against galvanic corrosion on fiberglass and wood hulled boats. Monitoring allows a visual indication of system performance and early warning of stray corrosion currents from electrical faults. Caustic attack to wood at protected fittings is prevented.

Features of the system include:

• Easy to read analog panel meter display
• Rugged, accurate, stable reference electrode
• Meter reads continuously, no push to read buttons
• Momentary switch for isolated shaft and prop protection level sensing
• Easy to install

Controller - with color coded display, should be mounted in highly visible location - 7"L x 6"H x 3"D

Anode Studs - Two 3/8" x 5"L insulated brass anode mounting studs with hardware

Reference Cell - Should be installed under hull near a protected fitting - 8"L x 2 3/4"W x 1"D (outside hull) - two mounting studs

Sense Brushes - 3/4"W x 13 5/8"L shaft wiper assembly's) - for sensing shaft and prop protection level

• Determine Effectiveness of Cathodic Protection
• Check Bonding System Integrity
• Check for AC Shoreline Interference
• Trouble Shoot AC and DC Electrical Systems