Pulsegen

BatteryMINDers^® are the new generation of SMART, pulse type "computer-on-a-chip" chargers, that safely charge and maintain all size / type / brands of batteries including starter, deep cycle and sealed types including AGM “dry” made by OPTIMA, ODYSSEY, EXIDE, INTERSTATE, et al. They do all of this without ever overcharging, no matter how long they are left on charge – days-weeks-or even months. Dubbed the chargers with "brains," they are the first to fully-automatically reverse the primary cause of early battery failure known as "sulfation". Sulfated batteries once considered beyond recovery can now be brought back to long-term useful condition. Certain models of BatteryMINDers^® can more than double the useful life of new batteries.

Every element known to man has a magnetic moment at a resonant frequency i.e., a point at which the chemical bonds that hold the molecules together to form a crystal can be broken. Sulfation, the number one cause of early battery failure, is simply crystals of lead sulfate (PbS04) which have formed on the
lead storage plates in a lead-acid type battery.

When a battery is improperly charged (over of under) or allowed to self discharge, as occurs during storage or extended non-use, these crystals build up on the battery's storage plates preventing the battery from ever being able to absorb a full charge and therefore never capable of delivering full power. These formations are known as "Sulfation" (sul-fay- shun), universally acknowledged as the major cause of diminishing performance and early battery failure. These crystals act as a

resistor, preventing the battery from storing energy from a charging source or giving up their energy to power a load.

VDC Electronics, Inc. has created a safe and simple, but very highly effective, method of generating the required resonant frequency pulses to safely dissolve these lead sulfate crystals (PbS04). This allows the molecules of sulfuric acid to return to the battery's electrolyte. By creating a pulse type waveform (with the required frequency range needed to dissolve both old and newly formed crystals),
coupled with a very fast rise time and a high amplitude pulse, more energy is developed to dissolve sulfation than by any other method believed to exist. On February 6, 2001 this unique approach was granted a U.S. Patent.

Note: Not every battery is a candidate for re-conditioning due to mechanical damage, due to vibration contamination, which has caused its cells to be "shorted". If, however, a 12 volt battery has a resting voltage of at least 1 O.5V and none of the 6 cells are shorted, de-sulfation of its plates can be accomplished.

NANOPULSER is an Electronic Desulfator Device that conditions your battery for better performance.

It produces Higher Capacities and Longer Battery Life.

Test results and Testimonials

Lead-sulfate is created when a battery is discharged. Then, when charged, in principle all the Lead-sulfate converts back to its component materials --- lead, lead dioxide and sulfuric acid. However, as batteries age, Lead-sulfate crystallizes on the surface of the electrode plates. This non-conductive material coating the surface of the electrode plate causes a reduction in the surface area needed for electro-chemical reactions of the battery. It also reduces the batteries' component materials (lead and acid) needed for the reactions. Sulfated batteries are often replaced prematurely and unnecessarily.

Nanopulser applies a weak but sharp electrical pulse that inhibits the buildup of hard Lead-sulfate crystals while gently decomposing the crystals without damaging the battery plates.

With Nanopulser installed, batteries maintain a high capacity as well as a maximum lifecycle.

Nanopulser revives old sulfated batteries.
If the old battery is not physically damaged but suffering from buildup of hard sulfation, Nanopulser will regenerate the battery by decomposing the hard sulfate gently and slowly. Continued use will inhibit further sulfation build-up and maximize the battery life. The length of the battery life depends on the condition of the battery when Nanopulser was installed. Later, when the battery finally fails, remove the Nanopulser and install on a new battery. This will prevent sulfation build-up from the beginning and assure the manufacturer's specified or intended lifespan and possibly extend it beyond.

Automobile
Nanopulser preserves a high CCA rating for the starter battery for many years. Vehicle's electrical equipment will operate at a higher voltage. Electric windows operate more powerfully when closing and opening. Radio sounds loud and clear. Headlights are brighter.

Marine Vessels
For marine usage, batteries sulfate fast because marine vessel batteries are usually in discharge cycle off shore. It would be common sense to use Nanopulser for conditioning the batteries. A case study showed an increase in the capacity of a battery in two weeks. This battery had lost capacity and was experiencing difficulty in starting the engine. However, after two weeks of treatment with Nanopulser, the battery capacity came back and the battery was starting the engine without a problem. Please be aware that using Nanopulser does not relieve you from regular recommended battery maintenance.

Recreational Vehicles
R.V. deep cycle batteries also do not last long because they are usually left unattended for long periods of time. Sulfation caused by natural discharge is very hard. This super-hard sulfation is the worst kind of sulfation.

Material Handling application - Forklift Batteries
In warehouse and business situations batteries are usually kept on a good maintenance schedule and fully charged. However the batteries typically fail after 4 to 6 years depending on battery quality and how well the maintenance was done. In the situation where maintenance is a problem, Nanopulser would be very useful. Also, even with a good maintenance schedule, we believe there is a small amount of hard sulfation that can NOT be decomposed by regular equalization charge. This very hard sulfation crystal can be decomposed by Nanopulser to maximize the life of the batteries. Even with meticulous maintenance, Nanopulser will help assure the good condition of the battery as a preventive measure. In addition, batteries will accept more charges and operation hours between charges will be kept longer for years.

・Models： PG-12N （for 12V）or PG-24H（for 24V）
・Size ： 3 - 5/32” × 2 - 5/32” × 1”
・Weight ： 85g(3 oz.)
・Power Consumption ： 40mA (24v 30mA)
・Auto shut-off feature works at 11.6V (To prevent complete discharge of batteries not regularly charged.)

Store Hours
Monday - Friday 8:30 - 5:00
Saturday 9:00 - Noon
closed holiday weekends